 Alerts you if your baby's movement stops- Suitable for infants to age one
- Provides double the coverage: two sensors monitor the entire crib
- Needs no direct contact with your baby
- Safe operation with AA household batteries
- Is compact, portable and easy to use
- A must for any parent, grandparent or day-care provider
- The simplest, most reliable movement monitor available
- Alerts you with an alarm if infant's movement stops or is irregularly slow
- Suitable for all infants from birth to one year of age
- Operates on regular "AA" household batteries so there are no dangerous power cords for the baby to find.
- Even the slightest body motions are registered as movement.
- Inexpensive peace of mind!
Invented in 1991 and popular worldwide for years, the Babysense™ V baby motion detection monitor is finally available in the U.S.
The simplest and most reliable monitor available, the BabySafe Babysense™ V is comprised of two very sensitive sensor pads which are placed under the baby's mattress, and a high speed microprocessor control unit. The control unit alerts you with a loud alarm if it does not detect any movement for 20 seconds or if it detects less then 10 micro-movements per minute. Even the slightest body motions are registered as movement.
Why Babysense V?
Of course, parents want to watch over their precious newborns, every single movement. But even Super Mom or Dad need sleep. That's where Babysense V comes in -- a new way to help give you that needed peace of mind, and much-needed sleep.
Easy to use and engineered for the way a baby moves
The Babysense V monitor detects your little one's movements, even the barely perceptable changes an infant's body makes during sleep. Its uniquely sensitive sensor pads, tucked under baby's mattress, constantly register even the baby's slightest motion. A high-speed microprocessor control unit captures the motion patterns.
With baby's every move, it flashes a green light, seen clearly from a distance. That reassuring green blink is your sign that your baby is moving, just as an infant should.
 If there's a change, Babysense V sounds the Alarm
If there's no movement for 20 seconds, or if Babysense V detects less than 10 micro-movements per minute, it immediately sounds an alarm and activates a flashing red light. That's your cue to check on the sleeping baby right away. Naturally, Babysense V can't replace a parent or caretaker, it can only alert you to a problem, giving you critical time to intervene.
Safe, proven technology, used around the world
Parents in Europe and Australia have been using this technology for over a decade. It's a simple, battery-operated system that doesn't connect to an electrical outlet. There are no wires connected to the baby. In fact, Babysense V has no direct contact with the baby: it's sensor pads are connected to a small control unit. When the battery needs replacement -- approximately every six months -- you see a low battery indicator light.
Use one sensor until baby is approximately 3 months old - add the second sensor as baby gets older.
More ways to keep your baby safe
No monitor can substitute for these essential safety guidelines.
- Make sure your baby sleeps on his or her back
- Never overheat the baby's room
- Never smoke around your baby
- Use firm bedding
- Don't put anything with your baby that could cause suffocation
Specifications:
- 2 sensor panels, ABS plastic, 268 x 438 mm
- Control unit, ABS plastic exterior, 113 x 157 x 35 mm
- Power: 4 standard 1.5 V batteries (not included)
|
